Cirrus Logic AN83 - Manual (Page 57)

AN83
AN83REV3 57
4) The current configuration of the adapter will be
displayed. Click on OK or press the Enter key
to proceed.
5) Press the ALT key then use the Adapter/Manu-
al configuration options to manually override
any of the current configurations setting shown.
6) Use Diagnostics/Self Test to test the function-
ality of the card.
7) Use the Diagnostic/Network Test screen to test
the ability of the card to communicate across
the Ethernet with another CS8900A-based card
which is also running the DOS Setup and In-
stallation Utility.
CONTACTING CUSTOMER SUPPORT
AT CIRRUS
Cirrus Logic is committed to providing the indus-
try’s most easily implemented Ethernet solution.
We invite you to contact us for assistance at any
time during the design process. Our Application
Engineering department offers free schematic and
layout review services and provides software sup-
port for Cirrus’s network drivers. Let Cirrus’s ap-
plication engineers help you confirm the optimum
design for your specific application.
To contact Cirrus Application Engineering, call
(800) 888-5016 (from the US and Canada) or 512-
442-7555 (from outside the US and Canada), and
ask for CS8900A Application Support, or send an
email to: [email protected].
Cirrus Web Site
Cirrus also offers free updates to the of the network
driver software using the Cirrus website:
http://ww.cirrus.com.