3 connecting to a pc, 3 connecting to a pc -4, Figure 3-3. ound new hardware window -4 – Cirrus Logic CRD49530-USB User Manual

Page 23: Figure 3-4. found new hardware wizard window -4

Installation, Setup, and Running First Application

CRD49530-USB User’s Manual

DS705RD3

3-4

3.1.3 Connecting to a PC

Connect the “B” end of the USB cable to P1 on the CRD USB Master Digital I/O Card.

2. Connect the “A” end of the USB Cable to a USB 2.0 port on a notebook or PC running Win XP.

3. Windows should recognize that a new device has been attached and display a notice saying “Found

New Hardware”.

Figure 3-3. ound New Hardware Window

4. Windows will display the Found New Hardware Wizard (below). Select the No, not at this time radio

button so that Windows does not connect to Windows Update for the drivers. Click Next.

Figure 3-4. Found New Hardware Wizard Window

5. Windows will then ask whether to use automatic installation or manual installation. Allow Windows to

install the software automatically and click Next.