WIKA IUT-11 User Manual

Page 68

Universal IS Pressure Transmitter UniTrans

Transmitter Operation with HART®-functionality

669

5 D

Subject to change due to technical modifications.

WIKA Alexander Wiegand GmbH & Co. KG · Alexander-Wiegand-Str. · 63911 Klingenberg · (09372) 132 - 710 · Fax - 706 · E-mail: [email protected] · www.wika.de

143

10.2.8 Window 'Simulation'

You can open the 'Simulation' window under 'Device' via the 'Simulation' menu item
or in the 'Context' menu (right mouse button) for the device that is selected in the
navigation window (project view).
The following warning will pop up while you browse to the window 'Simulation'.
After reading the information you can just confirm, or mark the check box below on
the left side 'Do not show this warning again'. Then the window 'Simulation' will
open.

During online operation, the measured value is given as a current output.

A set current value is given as a test signal until online operation is
selected.

Before changing and storing the parameter setting menu item
'Simulation' has to be closed.

Attention

This manual is related to the following products:

IUT-10