WIKA IUT-11 - Manual (Page 54)

Universal IS Pressure Transmitter UniTrans
Operation of Transmitters with Display
22
669
39
.0
5 D
/G
B
06
/2
00
6
Subject to change due to technical modifications. © Copyright WIKA Alexander Wiegand GmbH & Co. KG / Germany
WIKA Alexander Wiegand GmbH & Co. KG · Alexander-Wiegand-Str. · 63911 Klingenberg · (09372) 132 - 710 · Fax - 706 · E-mail: [email protected] · www.wika.de
129
9.5.6 Main Menu: Service
MAIN MENU
SERVICE
MOUNTING
CORRECTION
Mounting correction is performed;
sensor must be correctly positioned /
mounted and without pressure.
SERVICE
FUNCTIONS
SERVICE
LOOPTEST
SERVICE
DEVICE DATA
SERVICE
TIMER
RESET
TIMER
RESET
MIN/MAX VALUES
All values are reset
to the factory setting
(see 6.4)
SERVICE
PASSWORD
PASSWORD
(DE)ACTIVE
ENTRY
CIRCUIT TEST
Hrs.-TOTAL
Hrs.-CALIBRATE
Hrs.-RESET
Hrs.-SENSOR
RESET
ALL
RESET
ALARM
The set current value is
used as the test signal until the
"esc" button is pressed
Total number of
operating hours.
Number of hours
since the last
calibration.
Number of hours
since the last
system Reset.
Number of hours
since the last
Reset to zero.
Number of hours
that sensor was in
operation.
Min/Max values
are reset.
Reset the alarm after exceeding
the 4/20 mA limit, necessary when
setting fixed limits 4/20 mA FIX (see 6.5.3)
A digital value between
0000 and 9999 is set as
the password.
SERVICE
RESET
RESET ALL
???