Astro Pneumatic 22834-464 - Manual (Page 45)

QLS-4100 X 45
To set Print Intensity via the front panel:
Press the NEXT or PREVIOUS key until the Intensity menu is displayed.
Press the NEXT or PREVIOUS key to cycle through the intensity menus for each
of the four print stations. Stop when the print station you want to adjust is dis-
played.
The Intensity menu always displays the intensity setting for print station 1, identi-
fied in the menu as Head 1. Head 1 is the station closest to the media exit. The
display numerically increments each time the NEXT key is pressed: Head 1, Head
2, Head 3, Head 4.
With the desired station appearing on the display, press the + or - keys until the
print intensity setting you want is displayed. Intensity settings range from 1 - 32.
In most cases, the higher the temperature, the darker the print; the lower the
temperature, the lighter the print.
Press the SELECT key to confirm your choice.
1
2
3
4
5
Pause: Intensity
Head 1 = 12 *