Astro Pneumatic 1111 1/4 Palm Ratchet Wrench User Manual
1/4" palm ratchet wrench, Product information, Important
A
1111
1/4" Palm Ratchet Wrench
1/4" Palm Ratchet Wrench
1/4" Palm Ratchet Wrench
Important
When unpacking, check the parts diagram and part number
listing on page 2 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
Unpacking
www.astrotools.com
Product Information
• Compact and lightweight
• Ideal tool for confined working areas such as under
dashboard work
• Ergonomically designed blue composite body
SPECIFICATIONS:
• Square Drive:
• Free Speed:
• Overall Length:
• Net Weight:
• Max Torque:
• Bolt Capacity:
• Air Inlet Thread NPT:
• Air Hose I.D. Size:
• Avg. Air Consumption:
• Air Pressure:
1/4" (6mm)
240rpm
5-1/2" (400mm)
0.94lbs. (0.43kg)
16ft./lbs
1/4" (6mm)
1/4" NPT
3/8" (10mm)
4cfm
90psi
Astro Pneumatic Tool Co. warrants our products to the original user against defective
material or workmanship for a period of 1 year from the date of 1st use. Astro
reserves the right to determine whether the product failed because of defective
material, workmanship or other causes and to charge back for missing parts. Astro
Pneumatic Tool Co., at its discretion, will repair products covered under this warranty
free of charge. The original user is to return the product (with the exceptions listed
below) with the distributor’s name, address, adequate proof of date of purchase or a
copy of warranty card, and a short note explaining the problem.
Failures caused by
accident, alteration, or misuse are not covered by this warranty.
Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and
may not be transferred to subsequent owners.
This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do not
allow the exclusion of limitations of incidental or consequential damages so the above
limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
P.O. Box 251935
Los Angeles, CA 90025
PLEASE DO NOT RETURN ANY PRODUCT TO THE P.O. BOX.
CALL 1-800-221-9705 FOR INSTRUCTIONS.
1111
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Throttle Handel
Air Inlet Bushing
Exhaust Deflector
Muffler Felt
Throttle Valve Plug
O-Ring
Spring
O-Ring
Valve Stem
Throttle Valve
Spring Pin
Throttle Lever
Ball Bearing
Spring Pin
Rear End Plate
1111-01
1111-02
1111-03
1111-04
1111-05
1111-06
1111-07
1111-08
1111-09
1111-10
1111-11
1111-12
1111-13
1111-14
1111-15
4
1
1
1
1
1
1
3
3
1
1
1
1
1
1
Rotor Blade
Rotor
Cylinder
Spring Pin
Front End Plate
Ball Bearing
Internal Gear
Idler Gear
Needle Roller
Crank Shaft
Bushing
Bushing
Ratchet Housing
Clamp Nut
1111-16
1111-17
1111-18
1111-19
1111-20
1111-21
1111-22
1111-23
1111-24
1111-25
1111-26A
Needle Bearing
(old version)
1111-26
1111-27
1111-28
1111-29
1
1
1
1
1
1
1
2
2
1
1
1
1
Yoke
Reverse Button
1/4" Ratchet Anvil
Spring Cap
Spring
Pawl
Needle Roller
Friction Spring
Steel Ball
Washer
1/4" Thrust Washer
Internal Retaining Ring
1111-31
Drive Bushing
1111-30
1111-32
1111-33
1111-34
1111-35
1111-36
1111-37
1111-38
1111-39
1111-40
1111-41
1111-42
Idler Gear Plate
1111-43
updated on 5/16/2006
needle bearing