Kramer Electronics VS-812 - Manual (Page 23)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your Composite / s-Video / Audio Switcher
20
3. Press the INPUT SELECTOR button # 3
1
 Composite video and audio source # 3 to CV Video Acceptor 1 at the
composite video OUT 1 connector and to CV Video Acceptor 2 at the
composite video OUT 2 connector
.
INPUT SELECTOR button # 3 illuminates, indicating simultaneous
distribution of the:
 Converted composite video and audio source # 3 to s-Video Acceptor
1 at the Y/C video OUT 1 connector and to s-Video Acceptor 2 at the
Y/C video OUT 2 connector
4. Press the INPUT SELECTOR button # 5.
INPUT SELECTOR button # 5 illuminates instead of INPUT SELECTOR
button # 3, halting the conversion and distribution of the composite video and
audio source # 3 and indicating simultaneous distribution of the:
 s-Video (Y/C) and audio source # 5 to s-Video Acceptor 1 at the Y/C
video OUT 1 connector and to s-Video Acceptor 2 at the Y/C video
OUT 2 connector
 Converted s-Video (Y/C) and audio source # 5 to CV Video Acceptor
1 at the composite video OUT 1 connector and to CV Video Acceptor
2 at the composite video OUT 2 connector
s-Video Acceptor 2
S-VHS
s-Video Source
S-VHS
s-Video Acceptor 1
S-VHS
CV Video Source
CV Video Acceptor 1 CV Video Acceptor 2
1:2 CV DA 1:2 Y/C DA
Figure 17: A 1:2 CV Distribution Amplifier and a 1:2 Y/C Distribution Amplifier
1 Instead of pressing INPUT SELECTOR button # 3, you can press INPUT SELECTOR button # 5, to use your VS-812 as a
1:2 s-Video (Y/C) DA, as step 4 describes