Kramer Electronics VP-771 - Manual (Page 82)

VP-771 - The VP-771 RS-232 Communication Protocol 77
77
VOLUME-PARAMETER = output volume parameters:
[VALUE] either positive or negative digits (minus sign precedes negative values).
“+” increase current value,
“-“ decrease current value
Window
customization WIN-CUST WINDOW, HPOS,
HW , VPOS, VH
WIN- CUST WINDOW, HPOS,
HW , VPOS, VH RESULT
Parameters Description: fast window customization
[WINDOW] “0” for main window; “1” for PiP window
[HPOS] horizontal position value
[HW] horizontal width value
[VPOS] vertical position value
[VH] vertical height value
Set dual window state PIP PIP-MODE PIP PIP-MODE RESULT
Get dual window state PIP? PIP PIP-MODE
Parameters Description:
PIP-MODE = Dual window state:
"0" or "off" for single window.
"1" or "on" to for dual window.
Identification commands
Command Syntax Response
Protocol
Handshaking #CR ~OK CRLF
Read device model MODEL? MODEL MACHINE_MODEL
Read device serial
number SN? SN SERIAL_NUMBER
Read device
firmware version VERSION? VERSION MAJOR .MINOR
.BUILD .REVISION
Read device build
date BUILD-DATE? BUILD-DATE YYYY/MM/DD
HH:MM:SS
Read device protocol
version PROT-VER? PROT-VER 3000:MAJOR
.MINOR
Set machine name NAME MACHINE_NAME NAME MACHINE_NAME
RESULT
Read machine name NAME? NAME MACHINE_NAME
Reset machine name
to factory default* NAME-RST NAME-RST RESULT
Network settings commands
Network settings commands require admin authorization
Command Syntax Response
Set IP Address NET-IP IP_ADDRESS
NTIP
NET-IP IP_ADDRESS RESULT