DiGiCo Waves MultiRack SoundGrid - Manual (Page 21)

DiGiCo Waves Operation
1-21
2.1.11 Controlling MultiRack SoundGrid by Touch Turn .........
Controlling Plugins
- Touch plugin for full view.
- Touch the parameter you want to adjust; a yellow outline will appear on your selection.
- On your console, use the Touch-n-Turn knob to adjust settings.
Note: you can adjust plugin parameters by touch also, but for more precise operation we recommend using the “Touch-n-Turn” surface’s
controls.
Each and every Waves plug-in has a dedicated Manual explaining applications and controls.
For Easy Access – select the Question mark(?) and the plug-in manual will appear.
All manuals can be downloaded from Waves website,
2.1.12 Show Mode .........................................................................
Show Mode is a “safe mode,” used during performances, that lets you adjust parameters within plugins, but not change routing, configura-
tion, and other settings that could cause problems in a live situation. When Show is selected you’re locked out from much of the interface.
To Switch between Setup and Show modes, go to the Master view->System tab->Security and switch between Setup and Live.
When choosing Setup, MultiRack will switch to Setup mode, When choosing Live, MultiRack will switch to Show Mode.