AMX PTM-D15 - Manual (Page 9)

Platinum Touch Panel
3 PTM-D15 15" Platinum Touch Panel
Specifications (Cont.)
Ratings • Safety - UL, CUL, EPA, CB, TUV/BUART, Nordic
• EMI - FCC-B, CE
• VESA - DCC1/2B, DPMS
Enclosure High-impact plastic with gray matte finish
Weight:
PTM-D15 panel 5.5 kg (12.10 lbs.)
Input Signal:
Horizontal Frequency 31 kHz - 60 kHz
Vertical Frequency 50 Hz - 75 Hz
Maximum Pixel Clock 80 MHz
Rear Panel Buttons:
Power Switch Turns the display On and Off
AUTO Button Adjusts the picture position and performance automatically
UP Button Activates the On-Screen Display menu and moves the menu cursor clockwise
to select menu items.
DOWN Button Activates the On-Screen Display menu and moves the menu cursor counter-
clockwise to select menu items.
Increase Button (+) Activates the On-Screen Display menu. Selects the menu items and adjusts
their features (increases values).
Decrease Button (-) Activates the On-Screen Display menu. Selects the menu items and adjusts
their features (decreases values).
Rear Panel Connectors:
VGA Analog Input 15-pin Mini D-Sub (DB-15) connector for input of VGA signals
PWR 12 VDC 3-pin AC plug provides power to the display. Supplied by connecting
the Power Adapter and Power Cord.
USB Upstream Port Type 2 USB connector to Type 1 USB connector plug. Used to provide
communication between the touch panel and a video source.
• Self-powered; 5V/500Ma (max.)
• Full speed transfer @ 12Mb/sec and Low speed transfer @ 1.5Mb/sec
• USB 1.1 compliant
USB Downstream Port Type 1 USB connector to Type 1 USB connector plug. Used to communicate
between USB devices.
• Self-powered; 5V/500Ma (max.)
• Full speed transfer @ 12Mb/sec and Low speed transfer @ 1.5Mb/sec
• USB 1.1 compliant
Line In 3.5 mini-jack for audio input connector. Used to feed an external audio source
into the touch panel.
• Frequency response: 80Hz - 20KHz (typical)
Line Out 3.5 mini-jack for audio output connector. Used to transmit audio to an external
audio source.
• Practical output: 1.5w + 1.5w RMS (typical)
TouchScreen Signal Cable 8-pin Mini Din to 9-pin (DB-9) connector for TouchScreen signal
communication between the panel and computer/panel interface through
COM1 or COM2.
Tilt Angle 30° (degrees from vertical)
Base Swivel Angle +360° (from center position)