Safety instructions – AMX PTM-D15 User Manual
Page 5
Safety Instructions
a
PTM-D15 15" Platinum Touch Panel
Safety Instructions
1.
Installation:
!
Do not cover or block the ventilation holes in the case.
!
Do not install the monitor near heat sources such as radiators/air ducts, or in a place
subject to direct sunlight, excessive dust, mechanical vibration or shock.
2.
Warning on power connection - Use the pre-packaged power cord for connection to the rear
of the panel. The outlet should be installed near the monitor and be easily accessible.
!
Do not allow anything to rest on the power cord.
!
Disconnect the power plug from the power outlet under following conditions:
!
If you are using it for an indefinite period time.
!
When the power cord or plug is damaged.
!
If the product has been dropped or the cabinet has been damaged.
!
If the product exhibits a distinct change in performance, indicating a need for
service.
3.
Maintenance:
!
Clean the cabinet, glass, and controls with a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such
as alcohol or benzene.
!
Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as a
pen or a screwdriver. This type of contact may result in scratched glass.