AMX PTM-D15 - Manual (Page 12)

Platinum Touch Panel
6 PTM-D15 15" Platinum Touch Panel
PTM-D15 Sample Configuration
FIG. 3 shows a sample application for the 15" Platinum Table Top Panel using a TPI/3, touch panel,
computer (used to configure the TPI/3), and Central Controller.
Power to the PTM-D15 touch panel is supplied through an external power supply. Power to the TPI/
3 can be supplied either directly through a PSN6.5 or indirectly through an AXlink cable
connection from a Central Controller. The power source is dependant on the distance between the
TPI/3 and the Central Controller. If the distance between the too great, a local power source (like
the PSN6.5) must be used. Refer to the AXB-TPI/3 Touch Panel Interface 3 Instruction Manual for
more detailed information about specifications and wiring distances.
FIG. 3 Sample Platinum Touch Panel Configuration
AMX PSN6.5
Power Supply
2-pin captive-wire
DB-9 to 8-pin mini-DIN
AMX AXB-TPI/3 (front view)
AXlink 4-pin
Computer
External Power
(Adapter and Cord)
15-pin VGA cable
DB-9 connecting
Program Port from
TPI/3 to COM1/2
on rear of computer
connection to
Central Controller
AMX AXB-TPI/3 (rear view)
Platinum
Touch
Panel
(showing optional input cards)
PTM-D15