AMX PTM-D15 - Manual (Page 36)

On Screen Display (OSD) Features
30 PTM-D15 15" Platinum Touch Panel
4. Press the UP button to highlight the OSD Timer icon ( ), then press INCREASE or
DECREASE to highlight your choice of 10, 15, 20, 25, or 30 seconds.
5. Press the UP button to highlight the OSD Position icon ( ), then press INCREASE or
DECREASE to adjust the OSD menu position to your selection.
6. Exit the OSD by using the Save/Exit Icon ( ).
Adjusting the Picture Sharpness
You may need to adjust Sharpness to optimize the picture performance for your specific
application:
! Purely graphic application: recommend maximum sharpness recommended.
! Purely text application: recommend minimum sharpness recommended.
1. Press the Menu button ( ) to activate the OSD menu.
2. Press the DOWN button to highlight the Next Page icon ( ), then press the DECREASE
button. The second menu appears.
3. Press the DOWN button to highlight the Next Page icon ( ), then press the DECREASE
button. The third menu appears.
4. Press the UP or DOWN button to highlight the Sharpness icon ( ), then press INCREASE
or DECREASE to adjust .
5. Exit the OSD by using the Save/Exit Icon ( ).
FIG. 22 Adjusting the OSD Timer setting
FIG. 23 Adjusting the OSD Position setting
FIG. 24 Adjusting the Picture Sharpness
This is the amount of time that OSD menu remains on-screen
after its last use. Also referred to as the "inactivity time".
The OSD positions are chosen from a series of 9 preset
on-screen positions.