Panasonic HDC-SD1 - Manual (Page 8)

Before using
8
VQT1A34
If you connect this unit to a Panasonic TV (VIERA) compatible with VIERA Link (HDAVI Control TM ) with
a HDMI cable, you can use the remote control for the TV for playback. Refer to the operating
instructions of the TV for details.
A TV (VIERA) compatible with VIERA Link
B HDMI cable (optional)
ª Other linked operations
Turning the power on and off
If you turn off the power on the TV with the remote control for the TV, the power on this unit also turns
off.
Automatic input switching
If you connect with a HDMI cable and then turn on the power on this unit, the input channel on the TV
automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn on
automatically (if [Set] has been selected for the TV’s [Power on link] setting).
≥Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case,
use the remote control for the TV to switch input. (For details on how to switch input, please read the
operating instructions for the TV.)
Using the remote control for the TV for playback
B
A
VQT1A34_GC_ENG.book 8 ページ ２００７年１月２７日 土曜日 午後１時４６分