Panasonic HDC-SD1 - Manual (Page 49)

49
VQT1A34
Recording
Use this function when the light is emanating
from behind the subject and the subject appears
dark.
¬ Rotate the mode dial to select .
1 Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2 Move the cursor button up to
select [
].
The image on the screen will become
brighter.
To return to normal recording
Select [ ] again.
≥If you turn off the power or operate the mode
dial, the backlight compensation function is
cancelled.
Fade in: The image and audio gradually
appear.
Fade out: The image and audio gradually
disappear.
¬ Rotate the mode dial to select .
1 Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2
Move the cursor button left to
select [
].
3
Press the recording start/stop
button.
Start recording. (Fade in)
When you start recording, the image/audio
gradually appears.
4 Press the recording start/stop
button.
Backlight compensation
function
This is for protecting a backlit subject
from being darkened.
Fade in/fade out function
VQT1A34_GC_ENG.book 49 ページ ２００７年１月２７日 土曜日 午後１時４６分