Panasonic HDC-SD1 - Manual (Page 23)

23
VQT1A34
Setup
Inserting/removing the battery
1 Open the battery cover.
≥Push A while sliding it.
2
Insert the battery until it clicks
paying attention to the direction
of the battery.
B Push the centre of the battery until it
locks.
3 Close the battery cover.
1
Open the battery cover.
2 Remove the battery.
≥Move A in the direction of the arrow to
unlock it and then remove the battery.
3 Close the battery cover.
≥Be sure to set the mode dial to OFF and check
that the status indicator is off before removing
the battery.
≥The battery cover opens up to 180o.
Inserting the battery
A
B
Removing the battery
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
A
VQT1A34_GC_ENG.book 23 ページ ２００７年１月２７日 土曜日 午後１時４６分