beautypg.com

Built-in flash – Panasonic HDC-SD1 User Manual

Page 53

background image

53

VQT1A34

Recording

Use the built-in flash in order to record still
pictures in dark places.

¬

Rotate the mode dial to select

.

1

Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.

2

Move the cursor button left to
select [
ß].

≥Each time the cursor button is pressed left,

the indication changes by one setting in the
following order: [FLASH ON]

>

[FLASH AUTO]

> [FLASH OFF]

≥When the PHOTO SHOT button is pressed

halfway, the flash indicator will appear in
the bottom left corner of the screen.
[FLASH ON]:

ß

[FLASH AUTO]: ßA
[FLASH OFF]:

≥When [FLASH AUTO] is set, the ambient

brightness is automatically detected, and
the flash will activate only when necessary.
(If the flash is not necessary, the [ßA]

indicator will not appear when the
PHOTO SHOT button is pressed halfway.)

≥This function’s default setting is

[FLASH AUTO].

3

Press the PHOTO SHOT button.

The flash is activated and the picture will be
recorded.

When the flash is not used

Set the flash to [FLASH OFF].

≥Do not block the flash with your hand or by

other means.

≥The unit automatically determines if the flash is

necessary even when it has been set to
[FLASH OFF] by detecting the ambient
brightness. (If it determines that the flash is
necessary, the [

] indication lights up in red

when the PHOTO SHOT button is pressed
halfway.)

≥If the [

ß] indication etc. flashes or is not

displayed when the PHOTO SHOT button is
pressed halfway, the flash is not activated.

≥The available range of the flash is approx. 1 m

to 2.5 m in dark places. Pictures will appear
dark or reddish when they are recorded by
using the flash at distances greater than 2.5 m.

≥Using the flash fixes the shutter speed of 1/750

or faster to 1/500.

≥The picture may become out of focus in dark

places. If so, adjust the focus manually.

≥The picture may appear dark if the flash is lit in

front of a white background.

≥Set the flash to [FLASH OFF] where using a

flash is prohibited.

≥If the flash will be activated a large number of

times, it may take longer to charge it.

Built-in flash

VQT1A34_GC_ENG.book 53 ページ 2007年1月27日 土曜日 午後1時46分