Panasonic HDC-SD1 - Manual (Page 54)

54
VQT1A34
Recording
Reduces the phenomena where human eyes
become red from flashes.
1
Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2 Move the cursor button right to
select [
].
≥The flash is activated 2 times. Do not move
until the second flash is finished.
≥Use this when you take pictures of people in
dark places.
≥Red eye phenomenon may appear depending
on the recording conditions.
Press the MENU button, then select
[PICTURE]
> [FLASH LEVEL] #
desired item and press the cursor
button.
[ßj]: If the brightness is too high.
[ßd0]: In normal recording
[ßi]: If the brightness is insufficient.
Reduces the image shaking due to hand
movement when recording.
¬ Rotate the mode dial to select .
Press the MENU button, then select
[BASIC]
# [O.I.S.] # [ON] and press
the cursor button.
To cancel the image stabilizer function
Press the MENU button, then select [BASIC] #
[O.I.S.] # [OFF] and press the cursor button.
≥This function’s default setting is [ON].
≥In still picture recording mode, pressing the
PHOTO SHOT button halfway increases the
effect of the image stabilizer function. (MEGA
optical image stabilizer)
≥In the following cases, the image stabilizer
function may not work effectively.
– When the digital zoom is used
– When the unit is shaken greatly
– When you record a moving subject while
tracking it
Red eye reduction function
To adjust the brightness of the
flash
Image stabilizer function
This is for reducing image shakes
during recording.
VQT1A34_GC_ENG.book 54 ページ ２００７年１月２７日 土曜日 午後１時４６分