Panasonic HDC-SD1 - Manual (Page 64)

64
VQT1A34
Playback
ª About motion picture
compatibility
≥This unit is based on the AVCHD format.
≥The video signal that can be played back on
this unit is 1440k1080/50i.
≥This unit may degrade or not playback motion
pictures recorded or created on other products,
and other products may degrade or not
playback motion pictures recorded on this unit,
even if the products support the AVCHD.
≥No sound will be heard except during normal
playback.
≥If pause play is continued for 5 minutes, the
screen returns to the thumbnails.
≥When the amount of time recorded on the
scene is short, playback may not be possible.
≥Scenes which cannot be displayed as
thumbnails (the thumbnails are displayed as
) cannot be played back. An error
message appears and the screen shows the
thumbnails.
≥The power will not turn off even if the LCD
monitor is closed.
≥The date/time displayed may be different from
the recording date/time and it may take time to
display the thumbnail display when playing
back motion pictures not recorded on this unit.
≥The remaining time for playback indication will
be reset to “0h00m00s” each scene.
Press the
:
or
9
button on the
remote control during playback.
1
Move the cursor button up during
playback to pause the playback.
2 Move and hold the cursor button
right. (Slow-motion pictures will
be played back in reverse when
you move and hold the cursor
button left.)
≥Normal playback is restored when you
move the cursor button up.
≥When slow-motion pictures are played
back in reverse, they will be shown
continuously at intervals of 0.5 seconds.
ª Operating with the remote
control
Press the E or D button.
Skip playback (to the start of a
scene)
(Operation is possible with the remote
control only.)
Slow-motion playback
PLAY
STOP SKIP SKIP
PAUSE
SEARCH
STILL ADV STILL ADV
SEARCH
PLAY
STOP SKIP SKIP
PAUSE
SEARCH
STILL ADV STILL ADV
SEARCH
VQT1A34_GC_ENG.book 64 ページ ２００７年１月２７日 土曜日 午後１時４６分