Panasonic HDC-SD1 - Manual (Page 37)

37
VQT1A34
Setup
ª In order to increase the
brightness of the entire LCD
monitor
Press the POWER LCD button.
The [ ] indication appears on the LCD
monitor.
≥Press the POWER LCD button if the
surroundings are bright and the LCD monitor is
difficult to see. The entire LCD monitor will
become approx. twice as bright as usual.
≥When the POWER LCD button is pressed
again, the [ ] indication disappears and the
original brightness is restored.
≥This will not affect the images to be recorded.
≥If you turn on the unit when the AC adaptor is
used, this function will automatically be
activated.
≥This function cannot be used in PC Connection
mode.
Press the MENU button, then select
[SETUP]
# [LCD AI] # [DYNAMIC] or
[NORMAL] and press the cursor
button.
[DYNAMIC]:
The image on the LCD monitor becomes clear
and vivid. Optimum contrast and brightness are
set depending on the scenes recorded. Clear
and brilliant images are presented.
[NORMAL]:
Switches to the standard picture quality.
≥The effect will vary depending on the scene
recorded.
≥This function is automatically set to [DYNAMIC]
when the brightness of the LCD monitor is
increased (the [
] indication appears on the
LCD monitor) and cannot be set to [NORMAL]
independently.
≥This will not affect the images to be recorded.
POWER LCD
Changing the picture quality on
the LCD monitor
VQT1A34_GC_ENG.book 37 ページ ２００７年１月２７日 土曜日 午後１時４６分