Event recipients, Overview, Trap receiver settings – APC Network Management Card AP9617 User Manual

Page 77: Email options, Define up to four nmss as trap receivers, see, User’s guide, Network management card

USER’S GUIDE

network management card

Event Recipients

Overview

The Web interface and control console both have options that allow you to
define up to four trap receivers and up to four e-mail addresses to be used
when an event occurs that has the SNMP traps or e-mail enabled. See

Event Actions (Web Interface only)

Trap Receiver settings

To access the

Trap Receiver

settings that allow you to define which NMSs

will receive traps:

• In the Web interface, use the

Recipients

option in the

Events

menu.

•

In the control console, use the

SNMP

option in the

Network

menu.

Email options

See

E-mail Feature

Item

Definition

Community Name

This setting defines the password (maximum of 15
characters) used when traps are sent to the NMS
identified by the

Receiver NMS IP

setting.

Receiver NMS IP

Identifies by IP address the NMS that will receive traps.
If this setting is

0.0.0.0

(the default value), traps will not

be sent to any NMS.

Generation (Web interface)

Trap Generation (control
console)

Enables (by default) or disables the sending of any traps
to the NMS identified by the

Receiver NMS IP

setting.

Authentication Traps

Enables or disables the sending of authentication traps
to the NMS identified by the

Receiver NMS IP

setting.