beautypg.com

Url address formats, User’s guide, Network management card – APC Network Management Card AP9617 User Manual

Page 23

background image

®

USER’S GUIDE

network management card

21

URL address formats

Type the Management Card’s DNS name or IP address in the Web
browser’s URL address field and press

E

NTER

. Except as noted below,

http:// is automatically added by the browser.

• For a DNS name of Web1, the entry would be:

http://Web1

• For a System IP address of 158.205.12.114, when the Management

Card uses the default port (80) at the Web server, the entry would be:

http://158.205.12.114

• For a System IP address of 158.205.12.114, when the Management

Card uses a non-default port (5000, in this example) at the Web server,
the entry would be:

http://158.205.12.114:5000

If the error “You are not authorized to view this page” occurs
(Internet Explorer only), someone is logged onto the Web
interface or control console. If the error “No Response”
(Netscape) or “This page cannot be displayed” (Internet
Explorer) occurs, Web access may be disabled, or the
Management Card may use a non-default Web-server port
that you did not specify correctly in the address.

For more information, see

FTP Server, and Telnet & Web

options

.

For Internet Explorer, you must type

http:// as part of the

address when any port other than 80 is used. Omitting
http://causes the error “This page cannot be displayed.”
For more information, see

FTP Server, and Telnet & Web

options.