APC Network Management Card AP9617 - Manual (Page 58)

®
USER’S GUIDE
network management card
56
Distribution: Breakers and Fuses
From Device Manager , type
1
to select DC Power Plant . Then type 3 to
select Distribution . The following options are displayed.
1- Breakers (range of numbers)
2- Fuses (range of numbers)
From the Distribution sub-menu, type
1
for Breakers or
2
for Fuses . Then
at the prompt, enter the number of a distribution breaker or fuse to display
its state (open or closed), its configurable name, and its configurable alarm
setting.
• The name can be up to 16 characters.
• You can specify any of the standard alarm settings:
– Major activates the major relay.
– Minor activates the minor relay
– Relay 1 through Relay 6 activates the relay specified.
– Ignore ignores the alarm.