APC Network Management Card AP9617 - Manual (Page 34)

®
USER’S GUIDE
network management card
32
FTP Server, and Telnet & Web options
Each of these options has a setting which enables (by default) or disables
Access , and a Port setting that identifies the TCP/IP port used for
communications with the Management Card. The default Port settings are 21
(FTP), 23 (Telnet), and 80 (Web interface).
To enhance the protection provided by User Name and Password settings,
change the Port setting to a unique port number from 5000 to 65535. After
this change, when you log on, you must add a colon (:) and the non-default
Port number to the IP address used. The following examples show the FTP,
Telnet, and Web interface commands needed when the Port numbers have
been changed to 5000 for FTP, 59401 for Telnet, and 65002 for HTTP at a
management card with a System IP address of 159.215.12.114:
ftp 159.215.12.114:5000
telnet 159.215.12.114:59401
http://159.215.12.114:65002
The Telnet and Web options are combined in the Web
interface but separate in the control console.
See also
To use FTP to download configuration files, see the Management
Card Addendum (.\doc\en\addendum.pdf) on the APC Network
Management Card utility CD.
To use FTP to access a text version of the Management Card’s Event
Log or Data Log, see
How to use FTP to retrieve log files .