Snmp, Card is controlled, see, User’s guide – APC Network Management Card AP9617 User Manual
Page 35: Network management card
®
USER’S GUIDE
network management card
33
SNMP
An
Access
option (the
Settings
option in the control console) enables (by
default) or disables SNMP. When SNMP is enabled, the
Access Control
settings allow you to control how each of the four available SNMP channels
is used.
To define up to four NMSs to serve as trap receivers, see
Setting
Definition
Community
Name
Defines the password (maximum of 15 characters) which an NMS that is
defined by the
NMS IP
setting below uses to access the channel.
NMS IP
Limits access to the NMS or NMSs specified by the format used for the
IP address.
• 162.245.12.1 allows only the NMS with that IP address to have access.
• 162.245.12.255 allows access for any NMS on the 162.245.12 segment.
• 162.245.255.255 allows access for any NMS on the 162.245 segment.
• 162.255.255.255 allows access for any NMS on the 162 segment.
• 0.0.0.0 or 255.255.255.255 allows access for any NMS.