A&D Counting Scale HC-15Ki - Manual (Page 38)

36
‰ Data Length and Parity
0
7 bits, even parity.
1
7 bits, odd parity.
2
8 bits, non parity.
‰ “f-07” and “f-08” are for factory use and should be “0”.
F-09-X ½ key
‰ Operation mode for the ½ key
0
Operating as a key to display and/or change comparator
upper and lower limits.
1
Operating as M- key to subtract Count data from M+
memory.
2
Operating as a key to toggle the weighing unit between “lb”
and “g”.
‰ Decimal Point and RS-232C Output
0000
Decimal point: “
.
”
Header for stable weight data: “ST”
Acknowledgment of command:
R
>
F
>
Select the decimal point “
.
” or ”
,
” and output
format for RS-232C. Set 0 or 1 for each bit.
Decimal point: “0” = ”
.
”
“1” = ”
,
”
Header: “0” = “ST,+001.2346 kg”
“1” = “WT,+001.2346 kg”
Acknowledgment: “0” = ”
R
>
F
>”
“1” = ””
‰ “f-10”, “f-11” and “f-12” are for factory use and should be “0”.
f-06-05
f-09-01
F-09-01=2 is for
USA version
only.
0000
ST/WT
N.A.
Decimal
ACK Point
f-09-02