A&D Counting Scale HC-15Ki - Manual (Page 23)

21
5-2. Clearing A Memorized Unit Weight
1. Press and hold the C key, then press
the STORE UNIT WEIGHT key –
release both.
2. “Clear” will appear and “id-00” will
appear with С00Т blinking.
3. Use the 0 Æ 9 10-key pad to
display the ID number to clear.
(Example of ID number “12”)
‰ If you hit the wrong key, press the
C key to clear and start again.
4. Press the ENTER key.
The ID memory specified at step 3 will
be cleared and the display returns to
normal.
If there is no such ID number to clear, the
scale will beep. Return to step 2 to try again,
or press the RESET key to exit.
Clearing All ID Memories at Once
1. In the Step 2 above, press the TOTAL key.
“idall” will appear with ÑallÒ blinking.
2. Press the ENTER key, then
ÑallÒ blinking will stop.
3. Press the ENTER key again to clear all
of ID memories. Press the RESET to
exit without clearing ID memories.
Display will return to normal.
STORE
UNIT
WEIGHT
C +
ENTER
888.8.8.81 0
COUNT
WEIGHT UNIT WEIGHT
888 0.000 8
8
0.00000 0
00
888.8.8.81 0
COUNT
WEIGHT UNIT WEIGHT
88 Clear 8
8
a idall 0
00
TOTAL
ÑallÒblinking stops. ENTER
OR ENTER RESET
COUNT
888.8.8.81 0
WEIGHT UNIT WEIGHT
88 Clear 8
8
a id-00
888.8.8.81 0
COUNT
WEIGHT UNIT WEIGHT
88 Clear 8
8
a id-12