A&D Counting Scale HC-15Ki - Manual (Page 13)

11
3-2. To Start Counting
1. Press the ON/OFF key to turn the
scale ON. Or press the RESET key to
initialize any previous operations.
2. The three LED’s on the UNIT WEIGHT
BY keys will blink. This is to prompt you
to select a method for entering a unit
weight for operation.
3. S elect one of the ways to enter or recall the unit weight (the weight of one item of
what you are counting), and see the section noted for more instructions.
You can return to this point at any time during
operation by pressing the RESET key.
(This doesn’t clear the entered tare weight,
M+ memory, AWA settings and comparator limits. L
RESET
888.8.8.88 0
COUNT
WEIGHT UNIT WEIGHT
TOTAL
M+
SAMPLE
TOO LIGHT
STABLE
TARE
ENTERED
ZERO
HI LO OK
ACAI
888 0.000 8
8
0.00000
SAMPLE
KEY-
BOARD
ID.
UNIT
WEIGHT BY
By stored lD number: Section“3-5”
By using the l0-key pad: Section“3-4”
By using a sample: Section “3-3”
‰ 10 sample size
‰ 5, 25, 50 or 100 sample size
‰ Desired sample size
‰ Desired sample size not to use the
SAMPLE key