Advantech Industrial Mini-ITX Motherboard with DDR2/Dual GbE/PCI AIMB-221 - Manual (Page 74)

AIMB-221 User Manual 64
There are three selections for Power Management, and they have fixed mode set-
tings.
3.7.6 Video Off Method
Use this to select the method to turn off the video. The choices are "Blank Screen",
"V/H SYNC+ Blank" and "DPMS".
3.7.7 Video Off In Suspend
When the system is in suspend mode, the video will turn off. The choices are "No"
and "Yes".
3.7.8 Suspend Type
The choices are "Stop Grant" and "PwrOn Suspend".
3.7.9 Suspend Mode
Please refer to 3.7.5.
3.7.10 HDD Power Down
Please refer to 3.7.5.
3.7.11 Soft-Off by PWR-BTTN
If you choose "Instant-Off", then pushing the ATX soft power switch button once will
switch the system to "system off" power mode. If you choose "Delay 4 sec" then
pushing the ATX soft power button for more than 4 seconds will turn off the system,
whereas pushing the button for less than 4 seconds will switch the system to "sus-
pend" mode.
3.7.12 PowerOn by LAN
This item allows you to power on the system via the LAN. The choices are "Enabled"
and "Disabled".
3.7.13 PowerOn by Modem
To enable or disable the function to power on the system via a Modem connection
from a remote host. The choices are "Enabled" and "Disabled".
3.7.14 USB KB Wake Up From S3
When "Enabled", pressing any key will wake the system up from the S3 state. The
choices are "Enabled" and "Disabled".
Table 3.1: Power Saving
Saving Mode Function
Min Saving Minimum power management, Suspend Mode = 1 hr., and HDD
Power Down = 15 min.
Max Saving Maximum power management, Suspend Mode = 1 min., and HDD
Power Down = 1 min.
User Defined (Default) Allows you to set each mode individually. When not disabled, each
of the ranges are from 1 min. to 1 hr. except for HDD Power Down
which ranges from 1 min. to 15 min., and disabled.