beautypg.com

5 shutting down the implement, Shutting down the implement -32, Operation – Alamo 803213C User Manual

Page 98: Opera t ion

background image

OPERATION

INTERSTATER 02/11

Operation Section 4-32

© 2011 Alamo Group Inc.

OPERA

T

ION

Follow these guidelines to reduce the risk of equipment and grass fires
while operating, servicing, and repairing the Mower and Tractor:

-Equip the Tractor with a fire extinguisher in an accesible location.

-Do Not operate the Mower on a Tractor with an underframe exhaust.

-Do Not smoke or have an open flame near the Mower and Tractor.

-Do Not drive into burning debris or freshly burnt areas.

-Ensure slip clutches are properly adjusted to prevent excessive slippage and plate heating.

-Never allow clippings or debris to collect near drivelines, slip clutches, and gearboxes.
Periodically shut down the Tractor and Mower and clean clippings and collected debris from
the mower deck.

(SGM-12)

12.5 Shutting Down the Implement

To shut down the implement, first bring the tractor
to a complete stop. Then slow down the implement
by reducing the engine speed before disengaging
the PTO. Push the stop button to disengage the
wings and wait for all motion to stop before
proceeding to drive or shut down the tractor.

Park the tractor on a level surface, place the
transmission in park or neutral and apply the
parking brake, lower the attached implement to the
ground, shut down the engine, remove the key, and
wait for all motion to come to a complete stop
before exiting the tractor. OPS-F- 0011