Assembly, Assembl y – Alamo 803213C User Manual
Page 47
ASSEMBLY
INTERSTATER 02/11
Assembly Section 3-7
© 2011 Alamo Group Inc.
ASSEMBL
Y
If it is necessary to loosen the nut on the pivot pin. Re-torque the nut to 400 ft labs. Failure
to do so will cause the nut to loosen during use, allowing the pin to come out, thereby
causing certain machine damage.
Remove belt guard. Assemble the rod end of the tilt cylinder. Use the pin located in the ears on the end of the
housing and secure with the cotter pins. Reinstall belt guard.
Attach the air breather (Item 1) to the hydraulic
tank. ASM-FL-0015
Insert driveshaft through the pump mount weldment
until it slides into the crank shaft pulley coupling.
When using auxiliary hydraulic pump, place the
pump drive belt around driveshaft. Place splined
pulley weldment on the driveshaft. ASM-FL-0016
NOTE: All splines on driveshaft and pump should
have anti-seize applied.
Right Wing
Right Wing
- 02986941P (99 pages)
- Machete T 7740 (90 pages)
- Switchblade Sickle Bar 6 (112 pages)
- FALCON 15/10 (156 pages)
- AXTREME2 02988075P (174 pages)
- Brahma 02968822P (64 pages)
- JD-5205 (104 pages)
- RX72 (52 pages)
- MACHETE 02968915C (174 pages)
- none (150 pages)
- 00756179P (70 pages)
- Lawn Mower (70 pages)
- Maverick Boom Arm Mower (174 pages)
- A-Boom (226 pages)
- 02979718C (110 pages)
- 272 (136 pages)
- A84B (148 pages)
- RHINO 2409 (106 pages)
- SHD96 (140 pages)
- 7191852C (110 pages)
- SAMURAI 02986950P (104 pages)
- 800 (58 pages)
- FC-0002 (122 pages)
- A60 (138 pages)
- ST10 (74 pages)
- Exten-A-Kut II (142 pages)
- RHINO 7214 MSL (44 pages)
- RHINO 95C (56 pages)
- A72B (138 pages)
- 803350C (168 pages)
- Interstater 803213C (186 pages)
- 6212 (100 pages)
- 4211 MSL (104 pages)
- Eagle 14 (186 pages)
- RHINO FX21 (156 pages)
- TS-135A (72 pages)
- TS-100A (154 pages)
- 02968915P (170 pages)
- Axtreme 02983326P (116 pages)
- RX96 (172 pages)
- 00761808C (170 pages)
- Axtreme 02984405 (106 pages)
- Swingtrim (126 pages)
- Axtreme FC-P-0002 (114 pages)