Operation, Opera t ion – Alamo 803213C User Manual
Page 84
OPERATION
INTERSTATER 02/11
Operation Section 4-18
© 2011 Alamo Group Inc.
OPERA
T
ION
•
Inspect oil level in gearbox and replenish if
needed. A low oil level is a warning sign that
the gearbox may be cracked or its seal is
damaged and needs to be replaced.
•
Check the oil level in tank and replenish if
need. NOTE: Do not fill the tank with oil above
the level of the sight gauge. Over filling the
tank with oil after initial filling may result in oil
being discharged through the air filter on the
top of the hydraulic tank.
•
Perform scheduled lubrication as specified in
the maintenance section. OPS-F- 0006
•
Inspect cutter knives and knife pins for
looseness and excessive wear. Make sure the
mower is securely blocked up before crawling
beneath. Replace damaged, worn, and missing
knives as complete sets to maintain cuttershaft
balance.
•
Remove any grass or other debris which may
be wrapped around the cuttershafts.
•
Inspect the condition of deck skid shoes and
hardware. OPS-F- 0007