Moisture condensation has occurred. Turn off the camera and leave it for about an hour
before using it (DSC-TX100 / TX100V). Pull out the battery and the memory card and open
up the battery / memory card cover, then put down the camera in dry place until the moisture
to evaporate (DSC-TX10).

The camera becomes warm when you use it for a long time.

This is not a malfunction.

The Clock Set screen appears when you turn on the camera.

Set the date and time again.

[Details]

The internal rechargeable backup battery has discharged. Insert a charged battery, and set
aside for 24 hours or more with the power left off.

The date or time is incorrect.

The Area Setting is set to a different location than your current location. Change the setting
by MENU

(Settings)

[Clock Settings]

[Area Setting].

266

This manual is related to the following products:

DSC-TX100V