The time for the GPS acquiring location information can be shortened by taking in GPS assist
data. The state of GPS assist data can be checked on the camera.
If connection via internet is made using the supplied software, “PMB” or “PMB Portable”, the GPS
assist data can be updated automatically.

1. MENU

(Settings)

(Main Settings)

[GPS assist data]

Using GPS Support Tool

You can also update the GPS assist data by inserting a memory card into the computer.
Starts up [GPS Support Tool] from (PMB Launcher), select the memory card drive from your
computer, and then update the GPS assist data.

Notes

If [Date & Time Setting] is not set, or set time is shifted greatly, the time for the GPS
acquiring location information cannot be shortened.
Set the date and time correctly by MENU

(Settings)

[Date & Time Setting].

If the term of validity of GPS assist data has run out, the time until you can record location
information cannot be shortened.

206

This manual is related to the following products:

DSC-TX100V