Sony PEG-TH55 User Manual
Page 146
146
Performing the IR HotSync
®
operation
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
2
Click
(HotSync) in the Windows task tray (Notification
area) at the bottom right of the computer window once again,
and select [Setup...] from the menu.
The
Setup
window is displayed.
3
Click [Local].
4
Adjust the following settings as needed.
•
Serial port:
Specifies a virtual port for an infrared port. If you are not
sure of the connection port, refer to [Infrared Monitor] in [Control
Panel].
•
Speed:
Determines the speed at which files/data are transferred. Try
the rate, as [As Fast As Possible ] first, and adjust downward if you have
any problems.
5
Tap [OK].
The IR HotSync
®
operation is enabled.
Note
When performing the local HotSync
®
operation with a USB cable, you need to restore
the local HotSync settings.
b
For details, refer to “To restore the local HotSync settings” on page 147.
Continued on next page
• • • • • • • • • • • • • • • • • • •