Sony PEG-TH55 User Manual
Page 106
Customizing your CLIÉ™ handheld (Preferences)
106
Setting the Network preferences for a wireless LAN
C
WEP :
If “*” is displayed for [WEP] in the
ScanResult
screen, a WEP key
(encryption) option and the WEP key code are required.
Tap V to select a WEP key (encryption) option, and enter the WEP key
code when the
WEP KEY Input
dialog box is displayed.
D
ConnectMode
E
AutoConnect :
When multiple profiles are registered on your CLIÉ handheld, an
appropriate profile for your location is automatically selected to connect
to a wireless LAN access point. If you select [Enable], the profile will be
one of the targets when the auto connect is performed. When you selected
[Enable], the profile name with “ * ” is displayed in the
Wireless LAN
Setup
screen for profile list.
F
Advanced Setup
You can change the following settings by tapping [Advanced Setup].
Tap [OK] to return to the
Wireless LAN Setup
screen.
When you disable DHCP and configure the following
settings manually
You do not need to disable DHCP for normal use. If you want to disable
DHCP, ask the administrator of the wireless LAN network.
• IP Address
• Subnet Mask
• Gateway Address
• Primary DNS
• Secondary DNS
[Infrastructure]: Select this when connecting to the Internet via a wireless
LAN access point.
Select this for normal use.
[Adhoc]:
Select this when directly connecting to a wireless LAN
compatible device.
Tap to select [Adhoc] and select a channel from the
displayed list by tapping V next to [ch:].
Continued on next page
• • • • • • • • • • • • • • • • • • •