Adaptec SBC-599 - Manual (Page 87)

Chapter 6 SCSI Setup and Configurations 77
Extended BIOS Translation is used only with MS-DOS 5.0 or
above. You do not need to enable this option if you are using
another operating system such as NetWare, OS/s, Windows NT,
or UNIX.
When you partition a disk larger than 1 GByte, use the MS-DOS
disk utility as you normally would. Because the cylinder size
increases to 8 Mbytes under extended translation, the partition
size you choose must be a multiple of 8Mbytes. If you request a
size that is not a multiple of 8MBytes, fdisk rounds up to the
nearest whole multiple of 8MBytes.
n
Display Message during BIOS Initialization –
This option determines whether the Press for
SCSISelect ™ Utility message appears on your screen
during system boot up. The default setting is Enabled. If
this setting is disabled, you can still invoke the SCSISelect
utility by pressing after the host adapter BIOS
banner appears.
n
Multiple LUN Support – This option determines whether
booting from a SCSI device that has multiple LUNs is
supported. The default setting is Disabled. Enable this
option if your boot device has multiple LUNs.
n
Support for Ultra SCSI Speed – This option determines
whether the host adapter supports the fast transfer rates
(13.4, 16,20.0) of Ultra SCSI devices. The default setting is
Disabled.
Using SCSISelect Menus
SCSISelect menus list options you can select. To select an
option, use the - and ¯ keys to move the cursor to the option,
then press Enter.