Adaptec SBC-599 - Manual (Page 80)

70 SBC-596/599 User's Manual
- When using 50-pin connector only, choose “Low ON/High
ON” (Default)
- When using 68-pin connector only, choose “Low ON/High
ON” (Default)
- When using both 50-pin & 68-pin, choose “Low OFF/High
ON”
Select the default of “Low ON/High ON?” and press Enter, then
use the up and down arrows to make your new selection and
press Enter. Press ESC to go back to the Options menu. Press
ESC again and select Yes to exit the program.