Adaptec SBC-599 - Manual (Page 35)

Chapter 2 Installation Guide 25
LCD power select
5 V *3.3 V
J12
* default setting
Configuration of the VGA interface is done completely via the
software utility. You don’t have to set any jumpers. Refer to
Chapter 3 for software setup details.
Refer to Chapter 3 for details on connecting the four standard
LCD’s: Sharp LM64183P, LM64P89, Toshiba LTM10C042, Sharp
64C142, and Planar EL Display.
Keyboard connectors (CN12, CN19)
The SBC-596/599 board provides two keyboard connectors. A
5-pin connector (CN12) supports passive backplane applica-
tions. A second 6-pin mini-DIN connector (CN19) supports
both a keyboard and a PS/2 style mouse.