Adaptec SBC-599 - Manual (Page 38)

28 SBC-596/599 User's Manual
Watchdog timer configurationon
An on-board watchdog timer reduces the chance of disruptions
which EMP (electro-magnetic pulse) interference can cause. This is
an invaluable protective device for standalone or unmanned
applications. Setup involves one jumper and running the control
software (refer to Appendix A).
Watchdog select (J14)
When the watchdog timer activates (CPU processing has come to a
halt), it can reset the system or generate an interrupt on IRQ11.
This can be set via setting J14 as shown below:
Watchdog select
*System reset IRQ11
J14
1 1
2 2
3 3
* default setting
For information on programming the watchdog timer, see Appendix
A.