Adaptec SBC-599 - Manual (Page 13)

Chapter 1 General Information 3
Specifications
Standard PC system
• CPU:
Intel Pentium up to 233 MHz, P54C, P55C(MMX)
AMD K5, K6
Cyrix 6x86, Cyrix 6x86MX
• BIOS: AWARD Flash BIOS, supports plug & play
• Chipset: Intel 430TX
• Secondary level cache: 512 KB on board
• Green function: Supports power management option via BIOS,
activated by keyboard or mouse activity. Supports doze, sleep, and
suspended mode. APM 1.1 compliant
• RAM: 8 MB to 256 MB, four 72-pin SIMM socket, accepts 4, 8, 16, 32
and 64 MB SIMMs. Compatible with both EDO and FDM memory
• EIDE interface: Supports up to four IDE devices and the Ultra
DMA/33 bus
• Floppy disk drive interface: Supports up to two floppy disk drives,
5¼” (360 KB and 1.2 MB) and/or 3½” (720 KB, 1.44 MB, and 2.88 MB)
• Parallel port: One enhanced parallel port, supports SPP/EPP/ECP
parallel mode
• Serial ports:16C550 UARTs, Two RS-232 ports
• USB interface: two USB connectors with fuse protection. Complies
with USB Spec. Rev.1.0
• Watchdog timer: 63-level timer interval, jumperless with runtime
setup, generates system reset or IRQ11
• Keyboard/Mouse connector: A 6-pin mini DIN connector is located
on the mounting bracket for easy connection of a keyboard or a PS/2
mouse. An on-board keyboard 5-pin male keyboard header connector
is also available.
• ISA driver current: 16 mA (Normal), 64mA (High Drive, SBC-599 only)
VGA interface (SBC-599 only)
• Controller: C&T 65550 VGA controller with Windows accelerator
• Display memory: 1MB on-board DRAM, up to 2MB (optional)
• VGA CRT/LCD Display resolution:
- Non-interlaced CRT monitor resolution up to 1024x768 @ 256 colors