Nikon P7800 - Manual (Page 95)

75
Sh
ooting Fea
tures
Specialized Menu for
E, F or N
In
E, F and N shooting modes, the settings of the following menu
options can be changed in the top tab ( A12).
.
Focus-coupled
metering
If Metering ( A73) is set to Matrix or Spot and
AF area mode ( A73) is set to Manual, the
brightness of the subject is measured by giving
higher priority to the focus area.
• Default setting: On
E58
Commander mode
Allows you to set how the wirelessly-controlled
optional flash unit fires when the flash mode
(
A59) is set to z (commander mode).
• Default setting:
- Flash mode: Standard flash
- Flash control mode: TTL
E59
Option Description A
Save user settings Allows you to save the current settings. 55
Reset user
settings Allows you to reset the settings saved in E, F or
N.
57
Shooting mode
Allows you to select the standard shooting mode.
• Default setting:
A Programmed auto
The current flexible program (when set to A),
shutter speed (when set to B or D) or aperture
value (when set to C or D) settings are also saved.
49
Focal length
(35mm equiv.)
Allows you to set the zoom position for when the
mode dial is set.
• Default setting: 28 mm
–
Photo info
Allows you to set whether or not the virtual horizon,
histogram and framing grid are displayed in the
monitor. This setting is not applied to the setup
menu settings.
• Default setting: No check marks
99
Option Description A
User settings
Initial monitor display
Virtual horizon display
Photo info
Focal length (35mm equiv.)
Shooting mode
Reset user settings
Save user settings