Nikon P7800 - Manual (Page 219)

Re
feren
ce
S
ect
io
n
E 91
Fn1 + Command Dial/Fn1 + Selector Dial
Set the function to be performed when the command dial or multi selector is
rotated while pressing the
w1 (function 1) button during shooting.
• Rotating either the main command dial or sub-command dial enables the
command dial operation.
• This option is available when the shooting mode is
A, B, C, D, E, F, N
or movie custom setting mode.
B
Notes About Fn1 + Command Dial/Fn1 + Selector Dial
Operation is disabled when AE or AF is locked.
Press the
d button M z tab (A13) M Fn1 + command dial/Fn1 +
selector dial
Option Description
Off
(default setting)
No function is set. Operation will be disabled.
Metering ( E45) Change the setting for metering.
Continuous ( E46) Change the settings for continuous shooting.
Flash exp. comp.
(
E54)
Change the setting for Flash exp. comp.
Active D-Lighting
(
E56)
Change the setting for Active D-Lighting.
ISO sensitivity ( E33) Change the setting for ISO sensitivity.
White balance ( E35)
Change the setting for white balance.
• Preset manual measurement and fine adjustment of
white balance are not available.
Picture Control ( E40)
Change the setting for COOLPIX Picture Control.
• Quick adjust and manual adjust are not available.
Vibration reduction
(
E79)
Change the setting for vibration reduction.