Nikon P7800 - Manual (Page 47)

27
Th
e
Bas
ics of Shoo
ting and
Pl
a
y
b
a
ck
C
The Auto Off Function
• The time that elapses before the camera enters standby mode is about 1 minute.
The time can be changed using the Auto off setting in the setup menu ( A99).
• While the camera is in standby mode, the monitor turns back on if you perform any
of the following operations:
- Press the power switch, shutter-release button, or c button.
- Rotate the mode dial.
- Open or close the monitor.
C
Monitor Display
Press the w2 button to switch between showing and hiding the photo information
or shooting information that is displayed in the monitor ( A11).
1/250 1/250 1/250 1280 1280 F5.6 F5.6 F5.6 1280
Flashes
No operations
performed
3 min
Camera turns off. Camera enters
standby mode.
No operations
performed