Spektrum SPM18100 DX18 User Manual

Page 25

SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL

Updating Spektrum DX18 Sound Files

NOTICE: NEVER disconnect the battery from the transmitter while
the fi le transfer is in process. Doing so will damage the transmitter,
and the transmitter will need to be returned for service.

You have the option of installing new sound fi les in the DX18
transmitter. Before updating the sound fi les, make sure the
transmitter battery is fully charged.
To install new sound fi les:

1. Download the desired sound fi le from the Spektrum Community

at www.SpektrumRC.com. Save the fi le to the SD card for your
transmitter.

2. Insert the SD card in the DX18 transmitter.

3. Enter System Setup in the transmitter.
4. Select the SD Card menu, and then select Update Sound.
5. Select the new sound fi le you want to install. The transmitter will

scan the fi le and check for any errors.

6. The Transfer SD Card screen reappears when the fi le transfer is

complete.

IMPORTANT: The sound fi le will take approximately 1 hour to
update. Do not disconnect the battery or power off the transmitter
during the update.