Spektrum SPM18000 DX18QQ - Manual (Page 13)

13 www.spektrumrc.com EN
• Turn the scroll wheel to move through the screen content or change program-
ming values. Press the scroll wheel to make a selection.
• Use the Back
button to go to
the previous
screen
(for example,
to go from the
Mixing Screen
to the Func-
tion List).
• Use the
Clear button
to return a
selected value on a screen to the default setting.
• Direct Model Access enables you to access the Model Select screen without
powering off the transmitter. Anytime the transmitter power is on, press the
Clear and Back buttons to access the Model Select screen.
• Press and hold the roller while powering on the transmitter to show the
System Setup list. No radio transmission occurs when a System Setup screen
is displayed, preventing accidental damage to linkages and servos during
changes to programming.
• At the main screen you can roll the roller to view the servo monitor.
• The Main Screen appears when you power on the transmitter. Press the scroll
wheel once to display the Function List.
• When you want to change a value in a screen for a particular control position,
move the control to the desired position to highlight the value you want to
change, such as 0/1/2, up/down or left/right.
Navigation
Enter, Choose
or Exit Move between
options or change
value in an option Hold for 3
seconds and
release to move to
the Main Screen
Turn Hold Press
Tip: The tick mark below shows
the current switch position.
Rolling and clicking the roller
turns the selected box black,
indicating that the value or con-
dition will act on that position.