Blodgett SBF Series - Manual (Page 6)

4 OM-SBF
Inspection & Unpacking
CAUTION
SHIPPING STRAPS ARE UNDER TENSION
AND CAN SNAP BACK WHEN CUT. TAKE
CARE TO AVOID PERSONAL INJURY OR
DAMAGE TO THE UNIT BY STAPLES LEFT
IN THE WALLS OF THE CARTON.
The steamer will be delivered completely assembled in a heavy shipping carton strapped
to a skid. On receipt, inspect carton carefully for exterior damage. If damage is evident,
notify the local carrier immediately and file a damage claim. The manufacturer assumes
no liability for damage incurred in transit. Reconfirm that the voltage at the location is
compatible with the steamer you received.
Carefully cut the straps and detach the sides of the carton from the skid. Pull the carton
up off the unit. Be careful to avoid personal injury or equipment damage from staples
which might be left in the carton walls.
Write down the model number, serial number and installation date. Keep this
information for reference. Space for these entries is provided at the top of the Service
Log in the back of this manual.
When starting installation, check packing materials to make sure loose parts such as the
drain pan and drip tray are not discarded with this material.
CAUTION
THIS UNIT WEIGHS BETWEEN 150 AND
170 POUNDS (68 TO 77 Kg) DEPENDING
ON SIZE. INSTALLER SHOULD USE
PROPER EQUIPMENT TO LIFT SAFELY.