Blodgett SBF Series User Manual
Page 14
12
OM-SBF
Installation Instructions
Pan Racks for Single Stands Only
Assembly Instructions
1.
Unpack racks kit.
2.
Identify parts.
3.
Unscrew and remove screws #1 and washers #2 from the bottom of your steamer. Do not move the steamer. This will allow
the bottom threaded holes to stay aligned with the holes on the stand.
4.
Secure brackets #3 using screws #1 and washers #2 thru the holes on the stands and into the threaded holes on the bottom
of your steamer.
5.
To place racks on stand, align wires from top of the rack with the corresponding holes in bracket #3. Push the rack all the
way up into the bracket. Align bottom of the rack wires with the holes in the stand leg and allow rack to fall in position.
See also other documents in the category Blodgett Kiln:
- SG3240G (7 pages)
- MT3255G (2 pages)
- BCX-14G (60 pages)
- B36-RAD (24 pages)
- 1200 (3 pages)
- MT3240E/G (2 pages)
- SN-5G (20 pages)
- SC-7G (20 pages)
- 900 SERIES (22 pages)
- B48N-CCCC (2 pages)
- 1201 (2 pages)
- Conveyor Oven (3 pages)
- 966 (2 pages)
- COMBI B-142G (2 pages)
- AC-500 (15 pages)
- BE2136 (2 pages)
- BC-CCNE (2 pages)
- MT3870 (2 pages)
- KLT-12G (2 pages)
- KLT-12G (26 pages)
- ELECTRIC CONVEYOR OVEN MT1828E (2 pages)
- BG3240 (36 pages)
- R11021 (17 pages)
- RE-42 (2 pages)
- MT3855G (2 pages)
- COMBI COS-20G (2 pages)
- COS (2 pages)
- 1400 SERIES (18 pages)
- COMBI BC142EDS (2 pages)
- BG2136 (2 pages)
- 1415 (13 pages)
- 1415 (2 pages)
- ZEPHAIRE-E PLUS (2 pages)
- SHO-G (2 pages)
- S1820G (50 pages)
- MT2136E/G (2 pages)
- 1405 (2 pages)
- 1200 SERIES (16 pages)
- BCM (24 pages)
- BCT (47 pages)
- BC-20E (30 pages)
- BCP (52 pages)
- BDO-100-E (15 pages)
- DFG-100-ES (26 pages)
- Zephaire-100-G-Es (25 pages)