Blodgett SBF Series - Manual (Page 13)

OM-SBF 11
Your steamer is designed to operate smoothly and efficiently if properly maintained. However, the following is a list of checks to
make in the event of a problem. Wiring diagrams are furnished inside the service panel.
SYMPTOM WHO WHAT TO CHECK
No power. User a. Check wall circuit breaker.
b. Call for service technician.
Any unusual operation. User a. Press ON/OFF rocker switch to turn steamer off. Press again
to turn steamer on.
b. Call for service technician.
No steam. User a. Check and add water as required. (For autofill units, turn unit
off and on)
b. Ensure door is closed.
c. Call for service technician.
Door pops open. User a. Ensure drain and vent are not plugged. No more than two
units should be attached to a single drain line.
b. Check door pin adjustment per above.
c. Call for service technician.
HI TEMP indicator (error code
6) is displayed. User a. Wait 30 minutes for the unit to cool down, fault display should
go off. Turn unit on.
b. Call for service technician.
Dial gage will not read 212. User a. This may be normal, altitude and water purity may affect
temperature reading on the gage.
Troubleshooting