Allied Telesis AT-8324 - Manual (Page 32)

Planning the Installation
32
Stack of Four to
Eight Switches
In order to create a stack of from four to eight AT-8316F or AT-8324
Ethernet switches, you need the optional AT-Stack8 Stacking Matrix
Module (show in Figure 2-3). This module has eight ports, each
providing two gigabits of full-duplex bandwidth. Each stack requires
only one stacking module. You install the module into one of the
switches of the stack and then connect all of the switches to the
module using the AT-CABLE-4 cables.
Figure 2-3 AT-Stack8 Stacking Matrix Module
AT-STA CK8
STACK PORT S
1
6
2
7
3
8
4
IS-A
5
IS-B
STACK ID